When applying Plaster Mix M using a plaster machine, ensure high pressure and the right water ratio, start with the areas that will consume more, and apply gradually.įor thicknesses, more than 20 mm, use the ASTM C926 practice: each layer 10 - 15mm rough finish, should cure before applying the second coat for at least 2 days or follow the double-up or double-back procedure (which indicates to apply the second coat of plaster to the first coat as soon as the first coat has attained sufficient rigidity to receive the application without any damage). When the plaster starts to stiff, usually after 40 - 60 min depending on the surrounding conditions, smooth the material to achieve the desired appearance. Rod or level to a uniform thickness of 5-20 mm. Before the application of Plaster Mix M, Apply Spatter Dash SB to the surface.Īpply the mixed material using the hawk & trowel technique. The mixed material can be retempered after 1 hour from mixing up to 2 hours after that, the material can not be used since it starts to set.Īpply Plaster Mix M in a single or two layers on rough or smooth surfaces to achieve the desired thickness. To increase the plaster's workability and the adhesion to the substrate, we highly advise adding 1-2 liters of Saveto Bond 2 to the mixing water and adjusting the water requirements for each 50kg bag of Plaster Mix M. Mix for 3-4 minutes until achieving a uniform, lump-free consistency.įor manual (hand) mixing, water demand might differ from the mentioned above ratio due to the mixing efficiency that depends on human efforts.įor the spraying machine, adjust the water flow from 350-550 Liter/hour this depends on the desired consistency and the rubber pump conditions. Add the powder to the water and mix with a mechanical plaster mixer or a low-speed electric drill fitted with a suitable paddle. Add to the mixing container 8.5-9.5 liters of water for each 50Kg bag of Plaster Mix M.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |